2005 Hardy Commodore 36

The semi-displacement Hardy Commodore 36 has the feel of a trawler yacht and combines modern technology with a classic, traditional style of boating. An indispensable flying bridge for summer days is fully fitted with a double helm seat and an island helm console. The deckhouse saloon offers an interior helm with a great driving position and clear sight over the bow and around the quarters. Sliding port and starboard doors allow fresh air in. The spacious teak interior is designed with maximum comfort in mind. A forward cabin and aft en-suite stateroom accommodate four, with two berth facilities in the saloon deckhouse.

Vetus Bow Thruster 50

Holding Tank; stainless steel tank with deck connection for shore " pump out ". Remote gauge. Macerator pump for discharge to sea where permitted.

Storage locker / seat on Aft Deck for port and starboard Bimini and frame

Teak decking on aft deck, flying bridge, side decks and coachroof

Windscreen and door covers, flying bridge console cover, flying bridge coverall

Central Heating, diesel fired Eberspacher Hydronic system including screen demisters

Wheelhouse and Saloon:

Fully instrumented console including: Engine instruments, Compass, Raymarine ST60 Tridata speed log and depth instrument, Raymarine E120 Plotter/Radar screen, AIS 700 connected to plotters, 2 x Raymarine Ray 240 VHF with DSC, Raymarine ST6001 Smart Auto Pilot, Echomax Dual Band Radar Target Enhancer, MacMurdo Navtex and EPIRB.

12c DC switch and auxiliary panels and power monitoring Fuel and water gauges 240v AC isolator and switch panel Chart table and storage locker

Electronic engine controls

Gas alarm display / control

Helm and double co-pilot seat that folds down to form U shaped sofa area

U shaped sofa which converts to occasional double berth

Drinks fridge /freezer

21" Logic TV

CD player

Teak sideboard

Drop leaf dining table

Deep cupboards and drinks locker

Occasional coffee table with two stools which can alsobe used with the dining table

Co-ordinated fire resistant curtains, carpets and cushions

Teak and vinyl trimmed ceiling panels

All overhead lights have been changed to LED.

Chart light

Courtesy lights for forward and aft companionways

Forward Cabin:

Forward access hatch to chain locker.

2 single berths converting to double, with storage under.

V-berth cushions recently replaced and are unused.

Wardrobe, overhead locker, curtains and carpets.

Teak and vinyl ceiling trim. Deck hatch with blind and fly screen

Forward Toilet/Shower Compartment with electric flush toilet, porcelain sink with tiled splashback and combination shower head/tap

Owners Stateroom:

Comfortable double berth with headboard. Mattress recently replaced and unused since.

Bedside locker, double dressing table/vanity storage unit and mirrors

Wardrobe and ample locker space

Full width overhead lockers

Co-ordinated fire resistant curtains, carpets and cushions

Teak and vinyl trimmed ceiling panels

Escape hatch with blind and fly screen

Ensuite Toilet/Shower Compartment with electric flush toilet, porcelain sink with tiled splashback and combination shower head/tap

2 x 12v DC 180AH batteries, 1 per engine with emergency changeover, changed during current ownership

2 x 12v DC 125AH domestic batteries, changed during current ownership

Alternator split charging system 40A battery charger 220/240v

AC shore power system with 240v AC external socket for shore connection

12v to 240v Inverter for powering 240v equipment when underway

240v AC sockets

Immersion heater for hot water

Galley:

Fitted out in teak with formica work surfaces and tiled splashback

Crockery and cutlery lockers and drawers

Double drainer stainless steel sink with H & C mixer tap

Gas stainless steel cooker and hob

Refrigerator and freezer

Water system;

12c DC pressurized water system. 350l (78 gallon) baffled stainless steel water tank

36l (8 gallon) calorifier with indirect coil from engine and 240v electric immersion heater

Engine Room:

Separate insulated/ventilated engine and machinery room under saloon.Engine compartment coated with fire retardant paint.

Twin Perkins Sabre 265hp diesel engines.

3 x 1.5Kg halon BCF automatic fire extinguishers

Underwater Gear 2 x 1½” duplex stainless steel shafts

PSS dripless shaft seals

Manganese bronze P brackets

2 x handed 4 blade propellers and Stripper rope cutters

Cathodic bonding system to zinc anodes

Stainless steel electric trim tabs

Stainless steel grade 316 rudders and 1½” stocks

All seacocks and skin fittings have been replaced with Forespar Marelon type

Construction:

Initial lay-up Lloyds approved isophthalic gelcoat and resin.

Subsequent lay-up orthophthalic resin.

Heavy foam filled stringers.

Bonded waterproof plywood beds and foundations.

Hand bonded, resin coated waterproof plywood bulkheads.

Solid bonded engine beds with integral plate steel mountings.

Superstructure GRP with balsa and Trevira reinforcing.

Bonded and encapsulated waterproof plywood beds and foundations.

Flying Bridge:

Mast in tabernacle with stainless steel rigging

Free standing console with engine controls, instruments and repeater for Raymarine ST60 Tridata. Raymarine E80 Plotter/Radar screen. Raymarine Ray 240 VHF with DSC

Double helm seat with cushions and port Passenger seat (4 persons)

Floor access hatch for ease of engine removal

Main Deck:

Wide walk around nonslip self-draining deck

All deck fittings are stainless steel grade 316

Enclosed by bulwarks and 30mm stainless steel guardrails

30mm stainless steel pulpit and pushpit including fender storage

Stainless steel rub rail

Stainless steel bow rail 6 large cleats, bow fairleads, triple bow roller Delta 16kg anchor with 30m calibrated 9.5mm chain, electric winch with gypsy and rope drum, control on deck and at both helm positions

Gas locker

Deck storage locker

Aluminium framed marine windows with 3 pantograph wipers and fresh water washers

Sliding entry doors to wheelhouse port and starboard

Aft Deck Guardrails with dodgers

Steps to stainless steel Bathing platform with teak decking

Hot and cold transom shower

Swimming ladder

Loose Gear:

4 Warps

6 fenders

3 x 1Kg dry powder fire extinguishers

Navigation lights

3 electric bilge pumps

Manual bilge pump

Ensign, staff and socket

Length 10.67m 35 ft 6 in

Beam 3.78m 12 ft 4 in

Draft 1.14m 3 ft 9 in

Height above water 3.44m 11 ft 2 in

Height keel to roof 4.48m 14 ft 7 in

Dry weight approx. 9000 kg 9 tons

Engines:Twin Perkins Sabre M265TI diesel shaft drives

The engines have less than 700 hours use and have been regularly serviced

BH Boat Sales offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.